Accessories
  Monster Cable
   
  Alesis
  Art
  Behringer
  Crown
  DBX
  Fender
  Fishman
  M-Audio
  Mackie
  Marshall
  Presonus
  Roland
  SWR
  VOX
 
  Deering
  Gold Tone
 
  Cort
  Ibanez
 
  • Motu
  Digidesign
  • M-Audio
  • Glyph
 
  Alesis
  Edirol
  Korg
  Kurzweil
  Midiman
  Roland
Microphones
 

Designed especially with home-studio owners and musicians in mind, our new B-1 features a 1" capsule that captures your sounds with incredible realism, sensitivity and accuracy. Its wide frequency response from 20 Hz to 20 kHz is enhanced by a pronounced presence boost, making equalization unnecessary in many cases. Its cardioid polar pattern, switchable high-pass filter and -10 dB pad, SPL of 148 dB and unusually low inherent noise make it perfect for close miking and extremely flexible. The B-1 also comes with a carrying case, shock mount and windscreen.

Features

  • Pressure gradient transducer with shock-mounted 1 in. gold-sputtered, single-diaphragm capsule
  • Exceptionally wide frequency response from 20 Hz to 20 kHz with pronounced presence boost
  • Transformerless FET input circuitry for extremely low inherent noise
  • Cardioid polar pattern ideal for diverse studio and live applications
  • Switchable low-frequency roll-off and input attenuation
  • +48 V phantom powered
  • Extremely rugged construction with satin nickel-plated brass body
  • Delivered in a rugged hard case with suspension mount and windscreen

    [ top ]

The B-2 has become a favorite among sound, recording and broadcast engineers the world over. Its one-inch dual-diaphragm capsule delivers an unusually open, transparent sound with excellent transient response and a nearly linear frequency range from 20 Hz to 20 kHz with just a slight boost in the presence range. Selectable omni or cardioid polar patterns, switchable high-pass filter and -10 dB pad and exceptionally rugged construction equip the extremely flexible B-2 for a wide range of applications.

Features:

  • Professional 1 in. dual-diaphragm condenser microphone for unsurpassed audio quality
  • Ideal as main and support microphone for studio and live applications
  • Pressure-gradient transducer with shock-mounted gold-sputtered dual-diaphragm capsule
  • Exceptionally flat frequency response and incredible musicality
  • Selectable cardioid, omnidirectional or figure eight pickup pattern
  • Switchable low-frequency roll-off
  • Switchable input attenuation of -10 dB
  • Ultra low-noise transformerless FET input circuitry
  • Gold-plated 3-pin XLR output connector
  • Rugged construction with satin nickel-plated brass body
  • Heavy-duty suspension mount, windscreen and transport case included

    [ top ]

If you’re looking for a reliable all-round dynamic microphone, the XM2000S is a good place to start. It’s rugged enough to withstand the abuse of the road, and will accurately pick up just about anything you can think of. Its cardioid characteristic provides excellent gain-before-feed-back properties. In addition, it features a practical and nearly silent reed on/off switch.

Features

  • Dedicated vocal and instrument mic brings unbelievable quality to your studio and live performance
  • On/off Switch
  • Extremely high signal output makes your voice cut through
  • Ultra low distortion for super clean sound
  • Presence lift in critical mid-range gives you maximum voice projection
  • Exceptional off axis rejection eliminates feedback problems
  • Super rugged construction copes with your toughest live assignments
  • Foam-lined impact resistant carrying case included
  • Microphone stand adapter included
  • Type: Dynamic
  • Frequency Response: 80 Hz - 15 kHz
  • Polar Pattern: Super Cardoid
  • Impedance: 600 Ohms
  • Sensitivity: -52 dBV (0 dBV = 1 V/Pa), 2.5 mV/Pa
  • Connector: 3 pin balanced XLR (male)
  • Dimensions: 57.5mm (Head) x 117.5 mm (Main unit length); 175mm total length
  • Weight: 230 g

    [ top ]

If you’re looking for a reliable all-round dynamic microphone, the XM2000S is a good place to start. It’s rugged enough to withstand the abuse of the road, and will accurately pick up just about anything you can think of. Its cardioid characteristic provides excellent gain-before-feed-back properties. In addition, it features a practical and nearly silent reed on/off switch.

Features

  • Dedicated vocal and instrument microphone brings unbelievable quality to your studio and live performance.
  • Now with on/off switch for improved control
  • Extremely high signal output makes your voice cut through
  • Ultra-low distortion for super clean sound
  • Presence lift in critical mid-range gives you maximum voice projection
  • Exceptional off axis rejection eliminates feedback problems
  • Integrated pop filter
  • Microphone stand adapter included
  • Super rugged construction
  • Type: cardoid dynamic mic
  • Impedance: 250 Ohms
  • Bandwidth: 40Hz to 16 kHz
  • Connector: gold plated XLR
  • Weight: 12g

    [ top ]

Sound and reliability have made the ULTRAVOICE not only a favorite among entry-level vocalists, but also the choice of several professionals. Its cardioid polar pattern effectively rejects sound from the back and sides, making it exceptionally feedback-safe. A two-stage pop filter, tough steel mesh windscreen and noise-reducing shock-mount system round out its features.

  • Dynamic vocal mic w/ smooth mid frequency presence rise for excellent vocal projection
  • Shock mount system to cut down handling noise
  • Cardoid characteristic minimizes background noise and feedback
  • Integrated spherical wind and pop noise filter
  • Ultra low distortion for a super clean sound
  • Mic stand adapter included
  • Super rugged construction

    [ top ]



$149.99

Free Shipping!

The B-2 PRO is a high-performance dual-diaphragm studio condenser microphone. Vocalists and recording studio owners will be amazed by its uncompromising audio performance and features such as the additional low cut filter. The B-2 PRO provides a slightly pronounced 12 kHz range, producing the kind of “presence” that often eliminates the need for high-frequency EQing that would raise the overall noise floor. The B-2 PRO provides that much-desired transparency that can only be found on high-end large-diaphragm condenser mics. Key features include selectable cardioid, omnidirectional or figure-eight directivity pattern. The low-cut filter removes distracting low-frequency sounds, and built-in shielding minimizes high-frequency interference. A 10 dB attenuator can be used with high volume signal sources. The microphone is delivered in a rugged hard case with a suspension mount and a windscreen.

Features

  • Professional 1" dual diaphragm condenser mic for unsurpassed audio quality
  • Ideal as main and support mic for studio and live applications
  • Pressure-gradient transducer with shock mounted gold sputtered dual diaphgram capsule
  • Exceptionally flat frequency response and incredible musicality
  • Selectable cardoid, omnidirectional or figure eight pickup pattern
  • Switchable low frequnecy roll off
  • Switchable input attenuation of -10 dB
  • Ultra low noise transformerless FET input circuitry
  • Gold plated 3 pin XLR output connector
  • Rugged construction with satin nickel plated brass body
  • Heavy duty suspension mount windscreen and transport case included.

    [ top ]
Monitors
 

The BEHRINGER EUROLIVE B1800X is equipped with an 18" woofer that delivers 400 Watts at 8 Ohms and a sound pressure level of 98 dB. Typically, it would be used in combination with the EUROLIVE B1020/1220/1520 fullrange speaker systems to increase low-frequency performance in applications where you need more low-end power, i.e. dance clubs or rock gigs. Its newly designed die-cast pole socket makes the B1800X suitable for stacking with standard spacer rods. In addition, the new B1800X is equipped with an internal passive crossover, allowing you to build a stack without the need for additional amps or external crossovers.

Features

  • Type: 18" subwoofer
  • Frequency Response: 42 Hz - 250 Hz (-6 dB)
  • Power rating (RMS): 400 Watts
  • Power Rating (Pink Noise): 600 Watt
  • Impedance: 8 Ohms
  • Sound Pressure Level (1W @ 1m): 98 dB
  • Crossover Frequency: low pass 175Hz; slope 9 dB/oct. High pass; 175 Hz; slope: 12 dB/oct
  • Woofer: 18P400A4
  • Size: 23 3/8" W x 27 5/8" H x 20 7/8" D
  • Weight: 35.5 kg
  • Recommended Crossover Frequency: 80Hz-150Hz
  • Power rating/Impedance woofer: 400 Watts RMS/8 Ohms

    [ top ]

Our B2031 has become a favorite among musicians and engineers the world over for every imaginable application. Its neutral sound and extremely linear frequency response, optimized via manual trimming, assist you in getting the most out of your sounds, whether you’re recording, sampling, mixing or mastering. The low- and high-frequency amplifiers deliver plenty of power for the specially developed heavy-duty 8 3 /4 " polycarbonate woofer and ferrofluid-cooled HF driver. The unique wave guide developed by our CAD engineers delivers absolutely linear phase response and optimal stereo imaging, giving the TRUTH monitor an unusually large sweet spot.

Features

  • 2 way active high resolution studio monitor
  • Ultra linear frequency response from 50Hz to 21 Khz
  • Two built in high power amps with 150/75 Watts and enormous power reserves
  • Extremely High resolution tweeter with ferrofluid cooled titanium dome
  • Long throw 8 3/4" woofer with special polycarbonate diaphragm and sturdy cast aluminum chassis
  • Controlled dispersion pattern through phase-optmized wave guide system
  • Extremely large "sweet spot" through vertically/horizontally balanced dispersion characteristics
  • Active Frequency crossover with 4th order Linkwitz-Riley filters
  • Flexible adaptation to room acoustics, incl. subwoofer operation
  • Overload protection through separately controlled limiter for low and high frequency ranges
  • Automatic standby switching
  • Electromagnetic shielding for minimum interference
  • Delivery of "matched pairs". Measurement protocol included
  • Low vibration E1 MDF cabinet
  • Servo-balanced inputs on XLR and TRS connectors
  • Manufactured under ISO9000 certified management system

    [ top ]

The TRUTH B2031A is the substantially improved successor to our best-selling B2031. It is a high-resolution, active 2-way reference studio monitor with XLR and 1⁄4" TRS servo balanced inputs that delivers very neutral sound and has an extremely flat frequency response (50 Hz - 21 kHz). It includes built-in 150- and 75-Watt power amps with enormous power reserve plus separately controlled limiters for low and high frequency overload protection.

Features

  • Ultra linear frequency response from 50 Hz to 21 Khz with individual frequency diagrams
  • Built in 150 and 75 Watt power amps with enormous power reserve
  • Ultra high resolution ferrofluid-cooled tweeter
  • Long throw 8 3/4" woofer w/ special polycarbonate diaphragm & sturdy cast aluminum chassis
  • Controlled dispersion characteristics and extremely large "sweet spot" owing to the unique Behringer wave guide technology
  • Active crossover network with 4th order Linkwitz-Riley filters
  • Adjustable to a wide range of acoustic conditions and subwoofer operation
  • Separately controlled limiter for low and high frequency overload protection
  • Automatic standby mode (defeatable)

    [ top ]
Headphones
 

The HPS3000 high-performance studio headphones feature superb frequency response meeting the high demands of professional studio users. Additional features include a high-efficiency cobalt capsule, high dynamic headroom, single-sided oxygen-free copper cord and optimized oval-shaped ear cups with ultra-rugged headband construction. You get ultra-wide frequency response, high-definition bass and super-transparent highs.

  • Ultra wide frequency response
  • High definition bass and super transparent highs
  • Ultra wide dynamic range
  • High efficiency cobalt capsule
  • Single sided cord with oxygen-free copper wires
  • Optimized oval shaped ear cups
  • Ultra rugged headband construction
  • 40 mm Capsule diameter
  • 20hz - 2khz frequency response
  • 100 mW Max power handling
  • 64 Ohm
  • 110dB @ 1 kHz
  • 2.0 m cord length
  • 1/4" TRS Stereo Jack Connector

    [ top ]
Brian Moore
Carter
Cort
Daisy Rock
Danelelectro
ESP
Gretsch
  Guild
Ibanez
  Jackson
Jay Turser
  Olympia
Parker Guitars
  PRS
  PRS SE
Samick
Sierra Steel
Traveler
 
Alesis
Edirol
Korg
Kurzweil
Midiman
Roland
 
  AKG
Audio Technica
Behringer
CAD
M-Audio
MXL
Rode
Roland
Sennheiser
Shure
 
Behringer
Korg
M-Audio
Mackie
   
  Korg
Roland
 
ShreveSystems.com
CoolAssGuitars.com
All prices represent a 3% cash discount & are subject to change without notice. All sales are FINAL
View Terms